Tec Dive X-wing pro BCD

Scuba Military Backmount BCD, Scuba Navy Seal Backmount BCD, Performance Mono Wing, Harness performance / The dive gears of AQUATEC create the power to help people encounter and communicate with the ocean.

Best Sale

SCUBA AQUATEC Tec Dive X-wing pro BCD Service Introduction

AQUATEC - DUTON INDUSTRY CO., LTD. is Taiwan Tec Dive X-wing pro BCD supplier and manufacturer with more than 39 years experence. Since 1984, in the Scuba Equipment Manufacture Industry, Diving Equipment Industry, Diving Manufacturer, SCUBA AQUATEC has been offering our customers high quality Tec Dive X-wing pro BCD production service. With both advanced technology and 39 years experience, SCUBA AQUATEC always make sure to meet each customer's demand.


Tec Dive X-wing pro BCD

BC-943

Looking for a BC-943 X-wing pro Tech BCD that can deliver stability and comes equipped with a signal alert incorporated into its power inflator assembly? Then look no further Aquatec has what you are looking for. The BC-943 X-Wing pro BCD from AQUATEC uses a two-layer bladder design. The outer bladder layer is made from tough 1000 denier Cordura, while the inner bladder is made from 0.4mm polyurethane.

Scuba Military Backmount BCD, Scuba Navy Seal Backmount BCD, Performance Mono Wing, Harness performance

This BC-943 X-wing pro scuba BCD offers excellent back stability. military BCD comes equipped with 2 contoured stainless steel D-rings, with one on either side of the air cell, 2 overpressure valves, low-pressure L/P hose, and the Scub-Alert power inflator are included. The blow-molded plastic backpack assembly is impact resistant has durable nylon webbing harness with a left shoulder and waist stainless steel buckles for easy donning and doffing. The inner bladder has a zipper excess allowing replacement if required and 48-lbs (22kg) of lift.

BC-943: Navy Backmount BCD. Unique size. Lift: 48 Lb.
BC-943_B: Navy Backmount BCD Inner Bladder. Unique size. Lift: 48 Lb.

Scuba Gear Technical Information:

  • Bladder cover is tough 1000 Denier Cordura
  • 0.4 mm Polyurethane inner bladder.
  • Includes 60 cm low pressure LP horse.
  • Includes covered corrugated hose.
  • 3 pcs of over pressure valves.
  • 6 pcs of stainless steel d-ring.
  • One size fit most.
  • Philippen Military use.
  • ⊙ Diving Equipment OEM & ODM available.
  • ⊙ Diving Equipment customization.
  • ⊙ Manufactured by: Aquatec
ColorBlack
SizeUnique
Buoyancy22kg(48lb)

Certifica

PAT. 055432 / 171425 / M299134 / ZL 99 2 44783.6 / US 6,332,464,B1

Maintenance

  • After each use, must be rinsed with fresh water.

Warranty Period

  • From the purchase of one year from the date of the product warranty.
  • Normal operating circumstances, the non-human damage, the company must ensure that free maintenance.

Scuba Gear Service Kit

Scuba Gear Detail

Scuba Gear Regulator Icon Illustration

1000 Denier Cordura / PU bonded PI-208 Power Inflator Covered corrugated hose L/P hose O/P Valves SUS contoured 2" D-Ring
Related Products
  • Navy Dive Horse Collar BCD - Navy Horse Collar BCD
    Navy Dive Horse Collar BCD
    BC-002

    The BC-002 Aquatec Navy military Horse Collar BCD from uses a two-layer bladder design The outer bladder layer is made from tough 1000 denier Cordura, while the Inner bladder layer is made from 0.4mm polyurethane The bladder uses a one cell design so that air cannot be trapped in any part of the bladder This navy horse collar bcd offers excellent front stability 2 overpressure valves, a power inflator, and L/P hose are included.


    Inquiry Now
  • Performance mono wing - BC-932P Deep Ocean Wing
    Performance mono wing
    BC-932

    The BC-932 Deep Ocean Wing lift non-retraction BC's are made from the same superior materials as the banded BCs. They incorporate a pull dump located at the driver's side lower left and an inflator hose exiting the center or slightly off center of the BC tank side. Slots are provided in the non-inflated area for Cam Band usage.


    Inquiry Now
  • Performance Harness mono dount wing - Performan dount wings
    Performance Harness mono dount wing
    bc-924

    Dount stle configuration. Dount wing is imitate the wing of jet aircraft, reduce the resistance of the sea. Interior zipper backing. Interior Polyurethance (PU) backing protects against abrasions and punctures. Inner bladder polyurethance material, ultrasonically welded fitting and seams. Unity size. Children to adults can wear. Very light travel easy to carry and does not take up space. DIY by yourself, create your own style.


    Inquiry Now
  • Military Diver BCD - BC-72 Scuba Military BCD
    Military Diver BCD
    BC-72

    This is a unit for the advanced or professional diver. It is designed around a fully-featured back inflation buoyancy compensator device with its technical style inner air-cell and protective three-dimensional Nylon/Cordura outer shell. It offers unrestricted body movements that would be impossible with a traditional buoyancy compensator device.


    Inquiry Now
  • Tec Diving BCD - BC-117 Non retraction single tank BCs ( BCD / BC117-K45)
    Tec Diving BCD
    BC-117

    Maximum Size of Cylinders: Twin 20 liter or Single 20 liter. Maximum Buoyancy: 190 Newtons / 45 Lbs. Improper maintenance, use or misuse of this BC could result in serious injury or death. Improper maintenance, use or misuse of this BC could cause loss of buoyancy control and exposure to other hazards, including uncontrolled descents and uncontrolled rapid ascents, resulting in drowning, decompression sickness, air embolism, stroke, seizure.


    Inquiry Now
  • Comfort harness - BC-936 Comfort harness
    Comfort harness
    BC-936

    The BC-932 Deep Ocean Wing lift non-retraction BC's are made from the same superior materials as the banded BCs. They incorporate a pull dump located at the driver's side lower left and an inflator hose exiting the center or slightly off center of the BC tank side. Slots are provided in the non-inflated area for Cam Band usage.


    Inquiry Now

Files Download

Scuba Gear Detail